**Self-made lovely decorations 3D stereoscopic**
**Hand-made from start line infinite. Creative fingers pulled by the ever-changing**
Magiwire MAGIC line is malleable plastic line a very easy to use, when heated to 70 ℃ / 158 ° F above will melt, you can soften it and shaping in hot water.
MAGIC line with the use of special plastic mold, making the accessory; then, according to the instructions eleven bonding assembly, making the tower, bird cage, animals, angels ..... like 3D printers and other print-out three-dimensional shape decoration.
You can also play unlimited imagination, a self-made stereoscopic 3D modeling.
**◎◎◎ this product need to buy special mold with Magiwire MAGIC line to use ◎◎◎**
● This product is not children's toys, children's use of this product should be accompanied by an adult.
● heating with hot water without much preparation; pay attention to safety when used.
● use water containers, plastic non-preferred. If plastic containers, test MAGIC line after the high-temperature cooling, will stick to the container.
● MAGIC line as "thermal expansion" a slight shrinkage phenomenon, to avoid repeated heating MAGIC line.
● Never connect the MAGIC wire used in high temperature environments or applications, avoid the use of food preparation utensils or cutlery.
Age: 14 to 99 years old
● a new generation of plastic
● low temperature melting point of 70 ℃ / 158 ° F and above
● Light weight, high strength
● Non-toxic, does not contain heavy metals or plasticisers
● environmentally friendly materials, can naturally break down
● Prepare two water containers, for holding a hot water (70 degrees Celsius / 158 degrees Fahrenheit); another bloom cold water.
● According to the dedicated line plastic mold recess, clipping appropriate length Magical fill line; Pour hot water with a spoon to scoop the MAGIC soften bonding wire. Hot water does not need too much, as long as the line can MAGIC soften it.
● hand Gently press bonding point, and then use cold water to cool and solidify; curing time required for a few seconds.
● first use all parts of the mold is completed; Referring again to FIG assembled complete assembly work. When assembled, with a spoon to scoop a little hot water poured over the bonding point, hand soft reduction to bonding point, and then use cold water to cool and solidify.
**◎ owned tool**
● water container 2
● small scissors
● small spoon
**◎ the product contents and specifications**
Magiwire dedicated wire
Size: diameter of 1.75 mm, 10 meters
Material: low melting point plastic
Origin / manufacturing methods
Made in Taiwan