Dimensions: 190mm (H) x 240mm (W) x 140mm (D)
Material: Italian imported tanned leather first layer leather hand dyed chocolate
Strap: Adjustable, adjustment range 93cm-114cm, with 5 adjustment holes on the shoulder strap, the adjustment range for conversion to vertical height is 45cm-57cm, respectively 45cm → 48cm → 51cm → 54cm → 57cm
*After the gold repair installation*
The mouthpiece is connected by two pairs of screws. Although we will tighten the screws before delivery, in the course of use, there may be factors such as the habit of personal use, the multiple opening and closing of the mouthpiece, etc., which may cause the screws to loosen or fall off. . But do not worry, the probability of this situation is relatively small, if this happens, it is very simple to install your own money. Next, we will introduce you to the installation method.
1. Please find the screw first. We will send an extra pair of spare screws when we ship, and we should take care of it. If it is really lost, spare screws will come in handy.
2. Pass one of the glossy screws from the outside through the hole.
3. Tighten the other screw fitting from inside.
4. Finally, tighten it with a screwdriver and use it for a while. You can also use a screwdriver to check if it is loose.
1. Material selection
"Cut line" currently selected leather from all Italian A-class fat tanned leather. Since it is a natural material and the processing method used by the leather manufacturing factory is a phytoseiculture process with less cortical damage, there are inevitably a small number of "scars," "wrinkles," and "blood bars" on the surface of the leather. When we open materials, we will try to avoid, or put these parts in the product is not obvious or non-forced parts.
2. Pure hand stitching
We did not use sewing machines to make our products. All products were hand-sewn. Before sewing, you need to use a special diamond to punch out the suture holes on the leather. Only in this way can you sew a beautiful wavy suture effect, which is also the biggest difference from the machine suture. Although this will greatly increase the production time of leather goods, it is also an important step for the leather craftsman to give leather goods a soul and a warm touch.
3. Hand-edge polishing.
Before the final product comes out, the final step is to polish the edge of the leather. To make the skin look smooth, rounded and natural. The "tangent faction" has its own set of edge-sealing methods. First, smooth the sharp edges of the leather with sandpaper, and then apply a layer of sealing liquid to make the skin look smooth. After repeating 2-3 times, apply a layer of sealing wax and polish it again with a polishing rod. Until the skin looks smooth.
The “tangent pie” hand-dyed products currently use Fiebing's leather alcohol dyes imported from the United States. To dye evenly and naturally, at first we need to wet the skin with water, then apply the dye over and over again with a sponge, from light to dark, until we reach the color we want. After drying, a layer of fixing agent is added to increase the color fastness. Finally, apply clean water to the surface of the skin, wipe off the dust on the surface and make the color more uniform.
Because it is hand-dyed, there are subtle products between the colors of each bag, and each is different.