"Kerab" When you turn on the lights, you're excited and it begins!
Men always had the imagination of driving a plane and needed to purchase a yacht when they entered a mature man.
Like the dream of realizing a boy.
Or it's all done in the moment the lights are on!
[about this product]
This product is a semi-manual stainless steel product, hand-polished corners. The surface of the panel will be damaged by the laser
In the process of casting, natural burn marks and surface scratches are produced.
Naturally occurring in the process, individual products will be slightly different, not as a return policy.
【Product Package Contents】
● Wool surface stainless steel panel 1
● Switch 125V/15A
● Insulation rubber sleeve *2 only
● Crimping terminals *2 only
● Screws *2 only
● Buried into the wall, you need to use embedded box products that are in line with Taiwan specifications (the distance between the keyholes on both sides is 85mm)
● It is forbidden to install in outdoor and indoor wet areas (such as bathroom, balcony, kitchen, etc.)
● If the switch is loose, turn it tightly from the inner nut.
[Use caution points]
● Do not touch with damp body parts (hands, etc.)
● The edges are polished by hand and there will be sharp points. Please pay attention to children's safety
● Electrical capacity AC 125V ╱ 15A ╱ AC 250V ╱ 6A
● The use of ambient temperature -10 degrees C ~ +70 degrees C
[Safety related matters needing attention]
1. When installing the wiring, be sure to turn off the main power switch and install it by a professional electrician
2. The load needs to use 125V/15A within the approved resistance capacity
3. The switchboarder meets Japanese PSE safety standards and must not be used outside lighting fixtures
4. Please do a good grounding to avoid leakage
5. Please install in indoor dry area to avoid leakage current
6. Be sure to observe the national electrical code and applicable safety regulations
Origin / manufacturing methods
Taiwan / Hand-polished