ni.kou sterling silver/brass wire ring

  • この商品は「受注制作」です。お支払いが確認できてから、制作を開始しますので、ショップの休日を除く 7 日後に発送予定です。
  • 【新規登録限定】72時間以内に初回購入で5%OFF!
  • 5/1-5/31【5月アジアセレクション】海外の単一ショップで 5,000円 以上(送料除く)のご購入で送料400円 OFF(お一人様一回まで)。注意事項



  • チェックされた回数 19,112回
  • 合計販売点数:191点
  • 955 人がお気に入り登録
●Material: 925 sterling silver, brass ●Size: thickness of about 1mm



ni.kou sterling silver/brass wire ring


●Material: 925 sterling silver, brass ●Size: thickness of about 1mm ●Attention! Please be sure to confirm the ring size before placing the order, because the products are all made after payment. If the ring size change request is made two days after the order is paid, an additional modification fee will be charged. ●Girth measurement method & comparison table The size of the ring is mainly used for the "international size of the store form". When placing the order, please note the required "international size". The ring can be made in half size. Because the size of each country and the value of each size will be different, if the ring is measured in the silver building or other stores, it is recommended to measure and compare in the following ways to improve the accuracy. ✽Measurement method 1. Go directly to the Yinlou. Jewelry shop and ask the clerk to help measure the "International Wai" size, pay attention to non-US Wai, Hong Kong Wai. Japan Wai. 2. Put your ring on the ruler, measure the "inner diameter" of the ring (not including the ring thickness), and then compare the "inner diameter" in the table below. 3. Using an inelastic paper strip or measuring tape, tighten the "widest part" of the finger to be worn in a circle, and then compare the measured length to the ruler to obtain the "inner circumference". (Because the measurement method of each person will be different, this method has a large error.) 4. Use NI.KOU ring card to measure, the link is as follows Reminder: If your joints are wider than your fingers, please choose the joint size. Try to measure your finger in the evening, so the time is when the finger is the largest. Most people have left and right hands, and the size of their fingers will vary. Because the fingers will expand and contract with heat, avoid measuring after the fingers are cold or in contact with hot water to avoid inaccurate measurement. ●**Before placing an order, please make sure that the ring size is correct. There is no return or exchange of customized products!** This product is a "order-to-order" product. The production will start after payment. It takes an average of 7 production days (excluding holidays and shipping time). ●Because the products are all handmade, there will be hand-made traces, or asymmetrical situations, etc., there is no way to be as perfect as a machine. The size and pattern will be slightly different from the photo. The inner diameter of the ring will be +/-0.03cm Error, please place an order again if you accept it. ●Range modification rules 1. If you need to modify the ring after receipt, you will be charged for the modification fee and pay for the round-trip freight. Please refer to the following instructions for the modification fee. Please send the ring package intact and transfer the cost. 2. Provide free modification fee within 1 ring for the first time, within one month after receiving the item. Supplement: If it has been modified once, and after the second time it is modified into 1 ring, it will not be eligible for free ✽Large cost of ring-encircling change: Within 0.5 ~ 3 rings, one modification fee is NT$100 No modification is provided for more than 3 rings ✽Small fee for ringing and changing: Above 0.5 (inclusive), one modification fee is NT$100 ●Maintenance The silver chain part does not provide repairs. If the jewelry part needs to be repaired, please provide a picture and discuss with the designer. The price depends on the damage condition, and the return freight must be paid separately. ●About our handmade jewelry We use 925 sterling silver and pure copper to make, each hand-made jewelry, All are completed by traditional metalworking techniques-sawing, knocking, carving, welding, filing, setting, polishing and other processes. It retains the hand-made texture of welding and forging. ●Maintenance knowledge 1. All jewelry, no matter what kind of material, is afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemicals, etc., will seriously damage the jewelry and produce oxidation, so avoid and stay away. 2. The jewelry is recommended to be worn frequently. The body oil can make the jewelry produce a natural, warm and beautiful luster. 3. The jewelry will be oxidized over time and vulcanized or oxidized to turn yellow and black. Use a moist soft toothbrush with toothpaste or dentifrice to lightly brush the surface, or wipe with a silver or copper cloth to restore the original Metallic luster. 4. If the jewelry is treated with special vulcanization, please do not wipe it excessively to avoid the loss of the vulcanization design effect. 5. If you are worried that the chemical emulsion of silver wiping cloth and copper wiping cloth will cause skin allergies, you can rinse with water and wipe dry before wearing. 6. Natural stones, crystals and pearls can be cleaned with water and then wiped with a soft cloth. 7. When not wearing it, put it in a sealed bag cleanly to reduce the oxidation rate. 8. Do not put all kinds of jewelry in the same jewelry box. Different hardness of the jewelry will rub against each other and cause wear. 9. Never use any other tools to clean your jewelry, which will leave scratches on the surface of the jewelry. If using a brush is necessary, please use a clean or very soft brush to scrub your jewelry. Origin / manufacturing method Made in Taiwan handmade


クレジットカード決済, コンビニ決済, ドコモケータイ払い, PayPal, 銀行ATM振込(Pay-easy決済), Alipay